About Product:
The heat press machine can be used for T-shirs, caps, ceramic plates, ceramic tiles, mugs, coasters, mouse pads, jigsaw puzzles, lettering, other misc, fabrics & materials. It can transfer colorful pictures and characters of sublimating and dissolved printing ink onto ceramics, glasses and textiles such as cotton, flax, chemical fiber, nylon, etc. This all-in-one press includes flat platen, mugs and plates. The swing-away heat press boasts all of the must-have attachments. It has a built-in Teflon coated 15inch x 15inch (38 x 38cm) heat platen with a full range of heating coils to allow for consistency throughout its surface. The digital timer control is adjustable up to 999 seconds. The features a digital temperature gauge ranging from 0 - 250ºC (about 480ºF).
Application:
This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Moreover the heating accessory can be joined. It can swing-away 180 degrees and is convenient to take off the transferred materials and can be used for transferring on certain thick materials. You can replace the heating plate easily and conveniently without using any special tools.
Temperature setting:Press SET , the upper display will showing SP , and the lower of display will showing the temperature of last setting. Then enter into temperature setting option, press ▼ or ▲ (increase or decrease) to set the needed temperature. After setting well, please press SET , the upper display will show SK to go on the next step for time setting
Time setting:Press SET again, H1 LDE will showing ST , then enter into the time setting. Press ▼ or ▲ (increase or decrease) to setting the needed time. (Normally the time is 180 seconds for mugs and 15-20 seconds for t shirt printing)
Specification:
8IN1 5IN1
Features:
Brand new 5 in 1 heat press machine
Large 15" x 15" transfer element
Provides a big surface to create your own custom T-shirt
Digital LED controller
Temperature: set the desired temperature
Timer: set the desired time
Intelligent audible alarm after the transfer done
Full 360-degree rotation of swing-away design
Allows the heating element to be moved safely aside
Full-range pressure-adjustment knob
Can be adjusted according to the thickness of the material
Teflon-coated platen press element
Non-stick surface
Prevents scorching of transfers
Awfully simple operation
Draw down the handle and wait until it alerts
2 4/5in Long arm handle
Comfortable rubber grip for everyday use and long production runs
Removable silicone pad and cotton pad
Detachable lower platform
It is elevated with dual supports
Easily exchange to other elements
Metal and plastic construction
Built-in fuse for safe using
Adjustable feet for unevenly floor
CE certification
2 years warranty
Package Includes
2 x Plate presses
1 x Silicone pad
1 x Cotton pad
2 x Teflon Sheet
1 x T-shirt
1 x Manual
Note:
If you have any questions about this product, I hope you will contact customer service as soon as possible. We will serve you wholeheartedly
Product Details:
Fault diagnosis and solution:
1. If the controller box showing nothing when power on, there are 2 solutions:
a. Please check the fuse wire, checking the glass wire to see if the wire damaged or fusing, if damaged, please change the wire.
b.open up the back cover of controller box, and examine the electricity box,to see if some thread fall off or not, if fall off, please match it accordingly.
2. When power on, if the controller display showing 3 lines, please take out the heating platen, and replaced it with another heating panel, or mug heater. If the display is normal, then maybe is the second situation of “b”, the thread wire were disconnect. If still showing 3 line, then is the first situation of “a”, the socket wire were fall out or break.
a. Checking the inner wire of controller box, the white metal socket with 4 lines, please check if the thread is break or disconnect, if disconnect, please match it accordingly or replace it.
b. Checking the wire of heating panel , the red cycle is showing the ends of the cable, one end is 3 thread, please replace 2 thread will be okay.
3. When power on, the controller box showing values but cannot heating up: the display showing the actual room's temperature, please takes out the plug of head machine, and replaced it with other mugs heater or plate heater. If temperature is heating up normally, then will be the next situation “a”, if cannot heat up, will be “b”situation.
a. Checking the heating wire, the red cycle showing the ends of thread, please replace the white thread will ok.
b. Open up the back cover, and examine the thread to see if some thread disconnected or break, if disconnected, please follow the above“a”, if nothing showing, please following “b” to maintenance. If no break, then replace the controller box.
4. The head controller box heating up normally, the other parts will be not heating up, please change the heating part directly. is ok, but cannot count down, then please press the third button, this machine will count down. If still cannot count down, please replace the controller box.
Application:
This heat press machine enjoys multifunctions in one machine, it can be used for transferring on t-shirt, mug, plate, cap and so on. Moreover the heating accessory can be joined. You can replace the heating plate easily and conveniently without using any special tools.
