The size of the lace pattern stamp pressed on the leather is about 71mm*34mm (the diameter of the circle in the middle is about 28mm)
Reminder: The mold material is aluminum alloy. The back is flat. Suitable for machine pressure, no handle. If the leather you use is vegetable tanned leather, you can use a G-clip or a vise to clamp or press the leather after it is wet. Of course, it is better to have a machine to press, non-vegetable tanned leather must be hot pressed.
The above is a personal suggestion. The specific operation requires you to try several times to get the desired effect.
The effect in the picture is hydraulic machine pressure effect, if it is a friend without a machine, please be careful to buy.
The stamp mold can be used alone or in combination with multiple animal stamp molds. The effect as shown below:
They are very suitable for embossing on all kinds of leather goods, especially for belt embossing.
This mold must be used with a professional punch or machine equipment. The example picture effect is the pressing effect of a 10T electro-hydraulic machine. If it is a friend without a machine, please be careful to buy.
Suitable for batch leather embossing. It needs to be used with professional machines.The effect of pressing on a belt with a width of 38mm, for your reference.
