Button stamp sets stencil inserts Round Die Mold printing form cutting form metal form stamp set for Pro Button Maker button machine button press DIY badge button badge ABS metal for button size
Integrated die mold, easy to replace. With different shape sizes, you can create different sizes of badges, buttons, caps, buttons, key rings, etc. Easy to learn.
High production efficiency. You just have to print your favorite pictures before you can create your own badges.
Round Die Mold made of metal mold + ABS base plate.
Stamp sets:
Material: metal mold + ABS base board
Color: silver shape + white base board
Stamp size: 25mm , 32mm , 37mm , 44mm , 50mm，56mm，58mm，75mm
Scope of delivery:
3 stamp sets and ABS base board
Pack:
1 set of badge button stamp sets
The offer is only about stamp sets, no badge making machine. Please make sure your badge making machine is compatible with the stamp sets before placing an order.
How to make badges:
1. Put the iron cover, pattern paper and plastic film into the left mold in turn, the iron cover is below, the pattern paper is in the middle, and the plastic film is above.
2. Push the lower mold to the right until the upper mold is aligned with the lower left mold, and then place the pin base in the right mold with the sharp face upward.
3. When pressing the left die mould (upper clamp), please be aware that the three pins of the upper die mould do
not pass through the round holes of the iron sheet. Hold the machine body with left hand firmly and press the
handle with the right hand so that the spring can be pressed.
4. Push the die mould to the very left, align the upper and lower molds, press the paper card which has been pushed into the upper mold to the lower card of the right mold, at this moment the four iron pins of the upper mold should pass through the round holes.
5. Lift the handle, push the mold to the right, and the badge is finished.
